Are your Gas Line Repair services available in Exeter?

Yes, Masters Plumbing Service provides round-the-clock Gas Line Repair services directly in Exeter, NH.

How much does emergency service cost in Exeter?

We offer upfront, transparent pricing with no hidden fees for all service calls in Exeter.

🔬 Combustible Gas Detection · Manometer Pressure Testing

Professional Gas Line Repair in Exeter, NH — Leak Found, Repaired, Pressure-Tested

Name: Masters Plumbing Service
Telephone: +1-855-718-1500
Price range: $$
Rating: 4.9

Not every plumber is certified for gas work in NH. Our gas plumbers hold active state certifications for natural gas and propane installations, carry CSST-qualified training for flexible corrugated stainless steel tubing systems, and document every job with a written pressure test result before we close out.

📞 Call +1-855-718-1500 — Certified Gas Plumbers

Certified Gas Plumbers in NH Combustible Gas Detector Manometer Pressure Test Standard Permit & Inspection Handled

Licensed Gas Line Repair service in Exeter, NH - Masters Plumbing Service

Our Gas Line Standards

What Separates Certified Gas Work from Unqualified Shortcuts

If a contractor quotes gas line work without mentioning manometer pressure testing or combustible gas detection at completion, that's a gap in their safety protocol that you should ask about before agreeing to any work.

📜

NH-Certified Gas Plumbers Only

No unlicensed person touches gas line work at Masters Plumbing Service. The stakes are too high for on-the-job learning.

🔬

Combustible Gas Detection at Every Connection

We also detector-test any existing connections near the work area that weren't disturbed, to confirm no pre-existing issues in the adjacent line.

📊

Manometer Pressure Test — Always

This documentation is required by many local inspections and is the professional standard for confirming gas work is complete. Soapy water bubble testing is not an acceptable substitute for a manometer test on anything more than a simple appliance flex connector.

🏛️

Permits Pulled, Inspections Scheduled

Gas line work — new runs, repairs to service lines, appliance connection upgrades — requires a permit and inspection in most NH jurisdictions. We pull the required permit, schedule the inspection, and provide you with the inspection sign-off as part of the job documentation.

Our Gas Line Services

What Our Certified Gas Plumbers Handle in Exeter

Our gas plumbers handle the full range of residential and light commercial gas line work in Exeter, NH — from a suspect appliance connector to a full new gas run for a generator or outdoor kitchen.

Emergency

Gas Leak Detection & Repair

If you smell gas — the distinctive sulfur/rotten-egg odor added to natural gas for detection — the immediate protocol is: leave the building without operating any switches, leave the door open, call your gas utility's emergency line from outside to shut off the street supply, then call us. Our certified gas plumbers arrive with combustible gas detectors to locate the exact source of the leak in service lines, appliance connectors, meter risers, or distribution piping inside the structure.

Appliances

Gas Appliance Connection & Reconnection

Moving a gas range, installing a new gas dryer, connecting a gas fireplace insert, or hooking up a tankless water heater — each requires a code-compliant appliance connector (rated flexible connector or rigid pipe), correct shutoff valve accessible without moving the appliance, and a post-connection leak test and pressure test on the affected segment.

New Runs

New Gas Line Installation

We calculate BTU load for the intended appliances, size the new line in black iron or CSST per the installation context, install at the required depth for buried runs, and perform pressure testing on the new segment before any appliances are connected.

Pressure Test

Gas System Pressure Testing

A standalone gas system pressure test — without any repair or installation — is requested for several reasons: before purchasing a home with gas appliances, when an unexplained gas smell has been investigated and not found but a homeowner wants confirmation the system is sound, or at a contractor's request before final inspection.

CSST

CSST Flexible Gas Piping Service

Corrugated stainless steel tubing (CSST) is the flexible gas piping used in most newer Exeter homes — it's faster to install than rigid black iron and routes easily through framing. However, CSST requires specific installation requirements: proper fittings, correct bonding to the electrical grounding system, and protection at penetration points to prevent abrasion damage.

Propane

Propane System Service & Repair

{Propane systems used in areas of Exeter, NH without natural gas service have specific considerations compared to natural gas: different line pressures at the regulator (propane distribution pressure varies by system design), different BTU content per cubic foot, and propane's behavior of settling low (it's heavier than air, so propane accumulates at floor level rather than rising to ceilings).|We service propane supply lines from the tank to the structure, appliance connections, regulator function checks, and leak detection using detectors calibrated for propane's lower explosive limit.}

📞 Call +1-855-718-1500 — Certified Gas Plumbers Ready

Our Process

How Every Gas Line Repair Job Runs in Exeter, NH

Every step exists because gas work without it is unsafe, regardless of how minor the job appears.

Call & Emergency Protocol If Active Leak

Our dispatcher flags gas calls for certified-only technician dispatch. No unapproved personnel work on gas lines.

Gas Detection Survey & System Assessment

For new installation work, we assess the existing supply line pressure, measure the BTU demand of the new appliances, and calculate the required pipe diameter for the new run before quoting.

Flat-Rate Quote, Permit Coordination, Work Execution

For leak repairs, the gas remains off on the affected line until the repair is complete, the detector passes every joint, and the manometer test confirms a leak-free system.

Manometer Test, Detector Survey, & Written Documentation

After every gas job — repair, new run, or appliance connection — we conduct a timed manometer pressure hold test on the affected segment and detector-test every connection point. You receive the written test result as part of your job documentation.

Customer Reviews

Masters Plumbing Service Gas Line Customers — Their Experience

★★★★★

Needed a new gas line run to an outdoor kitchen setup. Masters Plumbing Service sized the line correctly for the combined BTU load of the burners and the side burner, ran 3/4-inch black iron through the crawl space and up through the exterior wall, installed a shutoff at the outlet, pressure tested the new segment, and handled the permit and inspection scheduling. Inspection passed first time.

— M. Rashid, Exeter

★★★★★

I bought an older home in Exeter that had a gas dryer stub but I'm switching to a gas range. Masters Plumbing Service traced the existing gas distribution, confirmed the supply capacity was adequate, extended the run to the kitchen with correctly sized pipe, capped the dryer stub, and provided a full manometer test on the entire modified system. Very thorough work — documentation exactly as described upfront.

— S. & A. Ibrahim, Exeter, NH

★★★★★

Commercial kitchen remodel required moving two gas lines and adding a new connection for a salamander broiler. Masters Plumbing Service sized the header and branch lines for the total connected BTU load, pulled the required commercial permit, executed the work, and provided a full system pressure test documentation for the health department inspection file. Clean work, inspected and passed first visit.

— T. Andersen, Exeter, NH

Trusted Gas Line Repair service in Exeter, NH - Masters Plumbing Service

Common Questions

What to Know Before Scheduling Gas Line Repair in Exeter, NH

Do not re-enter the structure to search for the leak source yourself. Do not use soapy water to check fittings while gas may still be present in the structure. Our certified gas techs with proper detection equipment handle the leak location and repair safely.

A manometer is a precision pressure gauge — either liquid-column or digital — that measures gas line pressure to a fraction of an inch of water column. After any gas line work, we isolate the repaired segment, pressurize it to the required test pressure, connect the manometer, and hold for a timed period. Any pressure drop during the hold period indicates a leak somewhere in the tested segment.

In NH, gas line installation and repair requires a licensed plumber or gas fitter with specific gas work certification — not just a general plumbing license. Requirements vary by municipality, but most jurisdictions require the technician to hold an active gas certification and the company to carry the applicable contractor license for gas work.

Corrugated stainless steel tubing (CSST) is a flexible yellow or black jacketed gas pipe used in most homes built or remodeled after approximately 1990. It's safe when installed correctly and properly bonded to the electrical grounding system. Early CSST installations — particularly from the 1990s through the mid-2000s — often lacked the bonding conductors now required by most codes following research showing ungrounded CSST can be damaged by nearby lightning strikes.

The inspection is an independent confirmation that the work meets code — including pressure test documentation, pipe sizing, and appliance connector ratings. We provide the inspection record as part of your job documentation.

Yes — this is one of the most common new gas line requests we handle in Exeter, NH. We calculate the BTU demand for all connected appliances in the new run, size the supply pipe to deliver adequate pressure at full combined load, run the line at required burial depth for the exterior portion, install a properly rated outdoor shutoff valve, and pressure test the new segment before any appliances are connected.

Professional Gas Line Repair in Exeter, NH — Leak Found, Repaired, Pressure-Tested